Feel  3.16
The best way to improve your game's feel and make it extra juicy
MoreMountains.Feedbacks.MMFeedbackTMPDilate Class Reference

This feedback lets you dilate a TMP text over time More...

Inheritance diagram for MoreMountains.Feedbacks.MMFeedbackTMPDilate:
MoreMountains.Feedbacks.MMFeedback

Public Attributes

bool RelativeValues = true
 sets the inspector color for this feedback More...
 
MMFeedbackBase.Modes Mode = MMFeedbackBase.Modes.OverTime
 the selected mode More...
 
float Duration = 0.5f
 the duration of the feedback, in seconds More...
 
MMTweenType DilateCurve = new MMTweenType(new AnimationCurve(new Keyframe(0, 0.5f), new Keyframe(0.3f, 1f), new Keyframe(1, 0.5f)))
 the curve to tween on More...
 
float RemapZero = -1f
 the value to remap the curve's 0 to More...
 
float RemapOne = 1f
 the value to remap the curve's 1 to More...
 
float InstantDilate
 the value to move to in instant mode More...
 
bool AllowAdditivePlays = false
 if this is true, calling that feedback will trigger it, even if it's in progress. If it's false, it'll prevent any new Play until the current one is over More...
 
- Public Attributes inherited from MoreMountains.Feedbacks.MMFeedback
bool Active = true
 whether or not this feedback is active More...
 
string Label = "MMFeedback"
 the name of this feedback to display in the inspector More...
 
float Chance = 100f
 the chance of this feedback happening (in percent : 100 : happens all the time, 0 : never happens, 50 : happens once every two calls, etc) More...
 
MMFeedbackTiming Timing
 a number of timing-related values (delay, repeat, etc) More...
 
bool DebugActive = false
 whether or not this feedback is in debug mode More...
 

Static Public Attributes

static bool FeedbackTypeAuthorized = true
 a static bool used to disable all feedbacks of this type at once More...
 

Protected Member Functions

override void CustomInitialization (GameObject owner)
 On init we grab our initial dilate value More...
 
override void CustomPlayFeedback (Vector3 position, float feedbacksIntensity=1.0f)
 On Play we turn animate our transition More...
 
virtual IEnumerator ApplyValueOverTime ()
 Applies our dilate value over time More...
 
virtual void SetValue (float time)
 Sets the Dilate value More...
 
- Protected Member Functions inherited from MoreMountains.Feedbacks.MMFeedback
virtual void OnEnable ()
 
virtual IEnumerator PlayCoroutine (Vector3 position, float feedbacksIntensity=1.0f)
 An internal coroutine delaying the initial play of the feedback More...
 
virtual void RegularPlay (Vector3 position, float feedbacksIntensity=1.0f)
 Triggers delaying coroutines if needed More...
 
virtual IEnumerator InfinitePlay (Vector3 position, float feedbacksIntensity=1.0f)
 Internal coroutine used for repeated play without end More...
 
virtual IEnumerator RepeatedPlay (Vector3 position, float feedbacksIntensity=1.0f)
 Internal coroutine used for repeated play More...
 
virtual IEnumerator SequenceCoroutine (Vector3 position, float feedbacksIntensity=1.0f)
 A coroutine used to play this feedback on a sequence More...
 
virtual float ApplyDirection (float normalizedTime)
 Returns a new value of the normalized time based on the current play direction of this feedback More...
 
virtual float ApplyTimeMultiplier (float duration)
 Applies the host MMFeedbacks' time multiplier to this feedback More...
 
virtual void CustomStopFeedback (Vector3 position, float feedbacksIntensity=1.0f)
 This method describes what happens when the feedback gets stopped More...
 
virtual void CustomReset ()
 This method describes what happens when the feedback gets reset More...
 

Protected Attributes

float _initialDilate
 
Coroutine _coroutine
 
- Protected Attributes inherited from MoreMountains.Feedbacks.MMFeedback
float _lastPlayTimestamp = -1f
 
int _playsLeft
 
bool _initialized = false
 
Coroutine _playCoroutine
 
Coroutine _infinitePlayCoroutine
 
Coroutine _sequenceCoroutine
 
Coroutine _repeatedPlayCoroutine
 
int _sequenceTrackID = 0
 
MMFeedbacks _hostMMFeedbacks
 
float _beatInterval
 
bool BeatThisFrame = false
 
int LastBeatIndex = 0
 
int CurrentSequenceIndex = 0
 
float LastBeatTimestamp = 0f
 
bool _isHostMMFeedbacksNotNull
 
MMChannelData _channelData
 

Properties

override float? FeedbackDuration [get, set]
 the duration of this feedback is the duration of the transition, or 0 if instant More...
 
- Properties inherited from MoreMountains.Feedbacks.MMFeedback
GameObject Owner [get, set]
 the Owner of the feedback, as defined when calling the Initialization method More...
 
virtual IEnumerator Pause [get]
 set this to true if your feedback should pause the execution of the feedback sequence More...
 
virtual bool HoldingPause [get]
 if this is true, this feedback will wait until all previous feedbacks have run More...
 
virtual bool LooperPause [get]
 if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again More...
 
virtual bool ScriptDrivenPause [get, set]
 if this is true, this feedback will pause and wait until Resume() is called on its parent MMFeedbacks to resume execution More...
 
virtual float ScriptDrivenPauseAutoResume [get, set]
 if this is a positive value, the feedback will auto resume after that duration if it hasn't been resumed via script already More...
 
virtual bool LooperStart [get]
 if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again More...
 
virtual bool InCooldown [get]
 returns true if this feedback is in cooldown at this time (and thus can't play), false otherwise More...
 
virtual bool IsPlaying [get, set]
 if this is true, this feedback is currently playing More...
 
float FeedbackTime [get]
 the time (or unscaled time) based on the selected Timing settings More...
 
float FeedbackDeltaTime [get]
 the delta time (or unscaled delta time) based on the selected Timing settings More...
 
float TotalDuration [get]
 The total duration of this feedback : total = initial delay + duration * (number of repeats + delay between repeats)
More...
 
virtual float FeedbackStartedAt [get]
 
virtual float FeedbackDuration [get, set]
 
virtual bool FeedbackPlaying [get]
 whether or not this feedback is playing right now More...
 
virtual bool NormalPlayDirection [get]
 Returns true if this feedback should play normally, or false if it should play in rewind More...
 
virtual bool ShouldPlayInThisSequenceDirection [get]
 Returns true if this feedback should play in the current parent MMFeedbacks direction, according to its MMFeedbacksDirectionCondition setting More...
 
virtual float? FinalNormalizedTime [get]
 Returns the t value at which to evaluate a curve at the end of this feedback's play time More...
 

Additional Inherited Members

- Public Member Functions inherited from MoreMountains.Feedbacks.MMFeedback
virtual MMChannelData ChannelData (int channel)
 
virtual void Initialization (GameObject owner)
 Initializes the feedback and its timing related variables More...
 
virtual void Play (Vector3 position, float feedbacksIntensity=1.0f)
 Plays the feedback More...
 
virtual void Stop (Vector3 position, float feedbacksIntensity=1.0f)
 Stops all feedbacks from playing. Will stop repeating feedbacks, and call custom stop implementations More...
 
virtual void ResetFeedback ()
 Calls this feedback's custom reset More...
 
virtual void SetSequence (MMSequence newSequence)
 Use this method to change this feedback's sequence at runtime More...
 
virtual void SetDelayBetweenRepeats (float delay)
 Use this method to specify a new delay between repeats at runtime More...
 
virtual void SetInitialDelay (float delay)
 Use this method to specify a new initial delay at runtime More...
 

Detailed Description

This feedback lets you dilate a TMP text over time

Member Function Documentation

◆ ApplyValueOverTime()

virtual IEnumerator MoreMountains.Feedbacks.MMFeedbackTMPDilate.ApplyValueOverTime ( )
protectedvirtual

Applies our dilate value over time

Returns

◆ CustomInitialization()

override void MoreMountains.Feedbacks.MMFeedbackTMPDilate.CustomInitialization ( GameObject  owner)
protectedvirtual

On init we grab our initial dilate value

Parameters
owner

Reimplemented from MoreMountains.Feedbacks.MMFeedback.

◆ CustomPlayFeedback()

override void MoreMountains.Feedbacks.MMFeedbackTMPDilate.CustomPlayFeedback ( Vector3  position,
float  feedbacksIntensity = 1.0f 
)
protectedvirtual

On Play we turn animate our transition

Parameters
position
feedbacksIntensity

Implements MoreMountains.Feedbacks.MMFeedback.

◆ SetValue()

virtual void MoreMountains.Feedbacks.MMFeedbackTMPDilate.SetValue ( float  time)
protectedvirtual

Sets the Dilate value

Parameters
time

Member Data Documentation

◆ _coroutine

Coroutine MoreMountains.Feedbacks.MMFeedbackTMPDilate._coroutine
protected

◆ _initialDilate

float MoreMountains.Feedbacks.MMFeedbackTMPDilate._initialDilate
protected

◆ AllowAdditivePlays

bool MoreMountains.Feedbacks.MMFeedbackTMPDilate.AllowAdditivePlays = false

if this is true, calling that feedback will trigger it, even if it's in progress. If it's false, it'll prevent any new Play until the current one is over

◆ DilateCurve

MMTweenType MoreMountains.Feedbacks.MMFeedbackTMPDilate.DilateCurve = new MMTweenType(new AnimationCurve(new Keyframe(0, 0.5f), new Keyframe(0.3f, 1f), new Keyframe(1, 0.5f)))

the curve to tween on

◆ Duration

float MoreMountains.Feedbacks.MMFeedbackTMPDilate.Duration = 0.5f

the duration of the feedback, in seconds

◆ FeedbackTypeAuthorized

bool MoreMountains.Feedbacks.MMFeedbackTMPDilate.FeedbackTypeAuthorized = true
static

a static bool used to disable all feedbacks of this type at once

◆ InstantDilate

float MoreMountains.Feedbacks.MMFeedbackTMPDilate.InstantDilate

the value to move to in instant mode

◆ Mode

MMFeedbackBase.Modes MoreMountains.Feedbacks.MMFeedbackTMPDilate.Mode = MMFeedbackBase.Modes.OverTime

the selected mode

◆ RelativeValues

bool MoreMountains.Feedbacks.MMFeedbackTMPDilate.RelativeValues = true

sets the inspector color for this feedback

whether or not values should be relative

◆ RemapOne

float MoreMountains.Feedbacks.MMFeedbackTMPDilate.RemapOne = 1f

the value to remap the curve's 1 to

◆ RemapZero

float MoreMountains.Feedbacks.MMFeedbackTMPDilate.RemapZero = -1f

the value to remap the curve's 0 to

Property Documentation

◆ FeedbackDuration

override float? MoreMountains.Feedbacks.MMFeedbackTMPDilate.FeedbackDuration
getset

the duration of this feedback is the duration of the transition, or 0 if instant


The documentation for this class was generated from the following file: